Thermoresponsive block copolymer brush for temperature-modulated hepatocyte separation.

Hepatic tissue engineering may be an effective approach for the treatment of liver disease; however, its practical application requires hepatic cell separation technologies that do not involve cell surface modification and maintain cell activity. In this study, we developed hepatocyte cell separation materials using a thermoresponsive polymer and a polymer with high affinity to hepatocytes. A block copolymer of poly(N-p-vinylbenzyl-O-ß-D-galactopyranosyl-(1→4)-D-gluconamide) (PVLA) and poly(N-isopropylacrylamide) (PNIPAAm) [PVLA-b-PNIPAAm] was prepared through two steps of atom transfer radical polymerization. On the prepared PVLA-b-PNIPAAm brush, HepG2 cells (model hepatocytes) adhered at 37 °C and detached at 20 °C, attributed to the temperature-modulated affinity between PVLA and HepG2. Cells from the immortalized human hepatic stellate cell line (TWNT-1) did not adhere to the copolymer brush, and RAW264.7 cells (mouse macrophage; model Kupffer cells) adhered to the copolymer brush, regardless of temperature. Using the difference in cell adhesion properties on the copolymer brush, temperature-modulated cell separation was successfully demonstrated. A mixture of HepG2, RAW264.7, and TWNT-1 cells was seeded on the copolymer brush at 37 °C for adherence. By reducing the temperature to 20 °C, adhered HepG2 cells were selectively recovered with a purity of approximately 85% and normal activity. In addition, induced pluripotent stem (iPS) cell-derived hepatocytes adhered on the PVLA-b-PNIPAAm brush at 37 °C and detached from the copolymer brush at 20 °C, whereas the undifferentiated iPS cells did not adhere, indicating that the prepared PVLA-b-PNIPAAm brush could be utilized to separate hepatocyte differentiated and undifferentiated cells. These results indicated that the newly developed PVLA-b-PNIPAAm brush can separate hepatic cells from contaminant cells by temperature modulation, without affecting cell activity or modifying the cell surface. Thus, the copolymer brush is expected to be a useful separation tool for cell therapy and tissue engineering using hepatocytes.

Modification of exosomes with carbonate apatite and a glycan polymer improves transduction efficiency and target cell selectivity.

Exosomes are secreted from a variety of cells and transmit parental cell-derived biomolecules, such as nucleic acids and proteins, to recipient cells in distant organs. In addition to their important roles in both physiological and pathological conditions, exosomes are expected to serve as natural drug carriers without any cytotoxicity, immunogenicity, or tumorigenicity. However, the use of exosomes as drug delivery tools is limited due to the low uptake efficiency of the target cells, insufficient release of the contents from the endosome to the cytosol, and possible adverse effects caused by the delivery to non-target cells. In the present study, we examined the effects of the modification of exosomes with carbonate apatite or a lactose-carrying polymer. Using newly generated monitoring exosomes that contain either firefly luciferase or fused mCherry/enhanced green fluorescent protein, we demonstrated that the modification of exosomes with carbonate apatite improved their release from the endosome into the cytosol in recipient cells. Meanwhile, the modification of exosomes with a lactose-carrying polymer enhanced the selective delivery to parenchymal hepatocytes. These modified exosomes may provide an efficient strategy for macromolecule therapy for incurable diseases that cannot be treated with conventional small-molecule compounds.

Direct visualization of the extracellular binding structure of E-cadherins in liquid.

E-cadherin is a key Ca-dependent cell adhesion molecule, which is expressed on many cell surfaces and involved in cell morphogenesis, embryonic development, EMT, etc. The fusion protein E-cad-Fc consists of the extracellular domain of E-cadherin and the IgG Fc domain. On plates coated with this chimeric protein, ES/iPS cells are cultivated particularly well and induced to differentiate. The cells adhere to the plate via E-cad-Fc in the presence of Ca2+ and detach by a chelating agent. For the purpose of clarifying the structures of E-cad-Fc in the presence and absence of Ca2+, we analyzed the molecular structure of E-cad-Fc by AFM in liquid. Our AFM observations revealed a rod-like structure of the entire extracellular domain of E-cad-Fc in the presence of Ca2+ as well as trans-binding of E-cad-Fc with adjacent molecules, which may be the first, direct confirmation of trans-dimerization of E-cadherin. The observed structures were in good agreement with an X-ray crystallographic model. Furthermore, we succeeded in visualizing the changes in the rod-like structure of the EC domains with and without calcium. The biomatrix surface plays an important role in cell culture, so the analysis of its structure and function may help promote cell engineering based on cell recognition.

An anti-oxidative cell culture dish inhibits intracellular reactive oxygen species accumulation and modulates pluripotency-associated gene expression in mesenchymal stem cells.

Maintenance of the pluripotent state of mesenchymal stem cells (MSCs) during in vitro expansion is an important factor for the successful proliferation of MSCs possessing high differentiation capacity. However, the differentiation potential of MSCs can easily be lost during in vitro expansion, particularly at late passages. Reactive oxygen species (ROS) are signaling molecules that help to maintain MSC function; however, excessive ROS generation can induce senescence and impair both the differentiation capacity and proliferation of MSCs. In this study, we have designed an amphiphilic block copolymer (redox copolymer), which possesses ROS scavenging capacity in the hydrophobic site. When this redox copolymer was coated on cell culture dishes coupled with human E-cadherin chimeric antibody (hE-cad-Fc), it had an antioxidative effect on cultured MSCs. We also confirmed that the redox polymer construct poly(ethylene glycol) tethered chain on the surface prevented nonspecific cell binding, whereas the co-immobilized surface allowed high adhesion of E-cadherin-positive MSCs. Interestingly, the intracellular ROS level was significantly decreased by the prepared cell culture dish, despite ROS being scavenged only on the surface of the dish, on the cell exterior. Consequently, the cultured MSCs retained high expression levels of pluripotency-associated genes, including SOX2.

Fabrication of 3D-culture platform with sandwich architecture for preserving liver-specific functions of hepatocytes using 3D bioprinter.

The development of new three-dimensional (3D) cell culture system that maintains the physiologically relevant signals of hepatocytes is essential in drug discovery and tissue engineering research. Conventional two-dimensional (2D) culture yields cell growth, proliferation, and differentiation. However, gene expression and signaling profiles can be different from in vivo environment. Here, we report the fabrication of a 3D culture system using an artificial scaffold and our custom-made inkjet 3D bioprinter as a new strategy for studying liver-specific functions of hepatocytes. We built a 3D culture platform for hepatocytes-attachment and formation of cell monolayer by interacting the galactose chain of galactosylated alginate gel (GA-gel) with asialoglycoprotein receptor (ASGPR) of hepatocytes. The 3D geometrical arrangement of cells was controlled by using 3D bioprinter, and cell polarity was controlled with the galactosylated hydrogels. The fabricated GA-gel was able to successfully promote adhesion of hepatocytes. To observe liver-specific functions and to mimic hepatic cord, an additional parallel layer of hepatocytes was generated using two gel sheets. These results indicated that GA-gel biomimetic matrices can be used as a 3D culture system that could be effective for the engineering of liver tissues. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1583-1592, 2017.

High-molecular-weight poly(Gly-Val-Gly-Val-Pro) synthesis through microwave irradiation.

In this study, we synthesized a polypeptide from its pentapeptide unit using microwave irradiation. Effective methods for polypeptide synthesis from unit peptides have not been reported. Here, we used a key elastin peptide, H-GlyValGlyValPro-OH (GVGVP), as the monomer peptide. It is difficult to obtain poly(Gly-Val-Gly-Val-Pro) (poly(GVGVP)) from the pentapeptide unit of elastin, GVGVP, via polycondensation. Poly(GVGVP) prepared from genetically recombinant Escherichia coli is a well-known temperature-sensitive polypeptide, and this temperature sensitivity is known as the lower critical solution temperature. When microwave irradiation was performed in the presence of various additives, the pentapeptide (GVGVP) polycondensation reaction proceeded smoothly, resulting in a product with a high molecular weight in a relatively good yield. The reaction conditions, like microwave irradiation, coupling agents, and solvents, were optimized to increase the reaction efficiency. The product exhibited a molecular weight greater than Mr 7000. Further, the product could be synthesized on a gram scale. The synthesized polypeptide exhibited a temperature sensitivity that was similar to that of poly(GVGVP) prepared from genetically recombinant E. coli. Therefore, this technique offers a facile and quick approach to prepare polypeptides in large amounts. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.

Sugar-carrying Polystyrenes Facilitate Harvesting of APCs from MLRs: Possible Application of Sugar-carrying Polystyrenes to Immunotherapy.

Antigen-presenting cells (APCs) play a pivotal role in cancer immunotherapy. APCs in conventionally used flasks are harvested by enzymatic digestion or cell scraping for application to cancer immunotherapy. However, these methods may impair functional molecules expressed on the APC surface and reduce their effects in cancer immunotherapy. Recently, we found that APCs could be harvested by shaking at 4°C in flasks coated with poly[N-p-vinylbenzyl-O-2-acetoamide-2-deoxy-ß-D-glucopyranosyl-(1→4)-2-acetoamide-2-deoxy-ß-D-gluconamide] (PVGlcNAc) or a copolymer consisting of sulfonylurea (SU) linked to poly[N-p-vinyl-benzyl-4-O-ß-D-galactopyranosyl-D-gluconamide] [P(VLA-co-SU)]. In the present study, we compared the functions of cytotoxic T-lymphocytes (CTLs) induced by APCs generated in PVGlcNAc- or P(VLA-co-SU)-coated flasks and conventional flasks. APCs from PVGlcNAc- or P(VLA-co-SU)-coated flasks showed higher expression of cluster of differentiation (CD)80/86, CD11c, and major histocompatibility complex class II alloantigen I-A(d), and higher cytotoxicity than APCs from conventional flasks. These results suggest that the use of PVGlcNAc- or P(VLA-co-SU)-coated flasks is optimal for harvesting APCs. The generated APCs also have a higher antigen-presenting ability compared to those generated in conventional flasks. Our results may contribute to the development of effective cancer immunotherapies.

Engulfment and clearance of apoptotic cells based on a GlcNAc-binding lectin-like property of surface vimentin.

The clearance of apoptotic cells is important to maintain tissue homeostasis. The engulfment of apoptotic cells is performed by professional phagocytes, such as macrophages, and also by non-professional phagocytes, such as mesenchymal cells. Here, we show that vimentin, a cytoskeletal protein, functions as an engulfment receptor on neighboring phagocytes, which recognize O-linked ß-N-acetylglucosamine (O-GlcNAc)-modified proteins from apoptotic cells as "eat me" ligands. Previously, we reported that vimentin possesses a GlcNAc-binding lectin-like property on cell surface. However, the physiological relevance of the surface localization and GlcNAc-binding property of vimentin remained unclear. In the present study, we observed that O-GlcNAc proteins from apoptotic cells interacted with the surface vimentin of neighboring phagocytes and that this interaction induced serine 71-phosphorylation and recruitment of vimentin to the cell surface of the neighboring phagocytes. Moreover, tetrameric vimentin that was disassembled by serine 71-phosphorylation possessed a GlcNAc-binding activity and was localized to the cell surface. We demonstrated our findings in vimentin-expressing common cell lines such as HeLa cells. Furthermore, during normal developmental processes, the phagocytic engulfment and clearance of apoptotic footplate cells in mouse embryos was mediated by the interaction of surface vimentin with O-GlcNAc proteins. Our results suggest a common mechanism for the clearance of apoptotic cells, through the interaction of surface vimentin with O-GlcNAc-modified proteins.

Cardiac differentiation of embryonic stem cells by substrate immobilization of insulin-like growth factor binding protein 4 with elastin-like polypeptides.

The establishment of cardiomyocyte differentiation of embryonic stem cells (ESCs) is a useful strategy for cardiovascular regenerative medicine. Here, we report a strategy for cardiomyocyte differentiation of ESCs using substrate immobilization of insulin-like growth factor binding protein 4 (IGFBP4) with elastin-like polypeptides. Recently, IGFBP4 was reported to promote cardiomyocyte differentiation of ESCs through inhibition of the Wnt/ß-catenin signaling. However, high amounts of IGFBP4 (approximately 1 µg/mL) were required to inhibit the Wnt/ß-catenin signaling and induce differentiation to cardiomyocytes. We report herein induction of cardiomyocyte differentiation using IGFBP4-immobilized substrates. IGFBP4-immobilized substrates were created by fusion with elastin-like polypeptides. IGFBP4 was stably immobilized to polystyrene dishes through fusion of elastin-like polypeptides. Cardiomyocyte differentiation of ESCs was effectively promoted by strong and continuous inhibition of Wnt/ß-catenin signaling with IGFBP4-immobilized substrates. These results demonstrated that IGFBP4 could be immobilized using fusion of elastin-like polypeptides. Our results also demonstrate that substrate immobilization of IGFBP4 is a powerful tool for differentiation of ESCs into cardiomyocytes. These findings suggest that substrate immobilization of soluble factors is a useful technique for differentiation of ESCs in regenerative medicine and tissue engineering.

Interactions of vimentin- or desmin-expressing liver cells with N-acetylglucosamine-bearing polymers.

It is necessary to develop highly functionalized liver cell culture systems for liver tissue engineering such as bioartificial livers and liver cell chips. To maintain a high level of hepatocyte function, well-organized patterning culture systems of hepatocytes and nonparenchymal cells would be advantageous. To design the patterning culture system using these cells, cell-recognizable polymers should be useful to regulate not only the hepatocytes, but also the nonparenchymal cells. Here, we report that N-acetylglucosamine (GlcNAc)-bearing polymers are useful as nonparenchymal cell-recognizable polymers. It has previously been reported that mesenchymal cells adhered to GlcNAc-bearing polymer-coated dishes through surface vimentin. It was also observed that nonparenchymal cells expressing vimentin or desmin specifically adhered to GlcNAc-bearing polymer-coated dishes. Especially, in hepatic stellate cells (HSCs) cultured on GlcNAc-bearing polymer-coated dishes, the expression of α-smooth muscle actin as an activated HSCs marker was suppressed in long-term. Therefore, HSCs were shown to maintain a quiescent state on PVGlcNAc-coated dishes during a long-term culture. These results demonstrated that GlcNAc-bearing polymers could be beneficial to culture nonparenchymal cells such as HSCs. Our findings suggest that galactose- and GlcNAc-bearing polymers can regulate the culture of all liver cells and may be useful tools for the establishment of liver tissue engineering.

Modulation of cytochrome P450 gene expression in primary hepatocytes on various artificial extracellular matrices.

We studied effect of artificial extracellular matrices (ECMs), such as collagen I, poly (N-p-vinylbenzyl-4-O-ß-D-galactopyranosyl-D-gluconamide)(PVLA) and E-cadherin-IgG Fc (E-cad-Fc) on hepatic metabolism to identify the mechanism of in vivo hepatocellular functional and metabolic integrity. mRNA expression of liver function marker, cytochrome P450 (CYP) and transporter genes in hepatocytes were compared among used ECMs using real-time RT-PCR. mRNA expressions of Cyp2c29 and Cyp2d22 among CYP genes in hepatocytes on PVLA were recovered after 3days due to enhanced liver-specific function by the spheroid formation of hepatocytes whereas mRNA expressions of CYP genes in hepatocytes on collagen and E-cad-Fc drastically decreased with time. mRNA expressions of the Cyp2c29 and Cyp2d22 in hepatocytes on PVLA were more recovered in the presence of epidermal growth factor (EGF) due to the more and bigger spheroid formation of hepatocytes. Multidrug resistance-associated protein 2 (Mrp2) protein was accumulated at intracellular lumen as similar to bile duct in hepatocyte spheroid formed on PVLA, indicating that spheroid formation of hepatocytes is very important for maintaining liver functions.

Targeting N-acetylglucosamine-bearing polymer-coated liposomes to vascular smooth muscle cells.

The targeted delivery of anti-inflammatory agents has great therapeutic potential for treating restenosis following percutaneous coronary intervention. To develop a drug delivery system targeted to injured blood vessels, we examined whether N-acetylglucosamine (GlcNAc)-bearing polymer-coated liposomes (GlcNAc-Ls) are specifically taken up by vascular smooth muscle cells (VSMCs). Flow cytometric analysis revealed that GlcNAc-Ls were taken up by VSMCs in vitro. Furthermore, GlcNAc-Ls were intravenously administered to mice that had undergone wire-mediated vascular injury. GlcNAc-Ls markedly accumulated at the intramural site of the injured vessel walls but not at the contralateral (uninjured) vessel walls. These results demonstrated that GlcNAc-Ls can be specifically taken up by VSMCs both in vitro and in vivo. We propose a novel strategy of using GlcNAc-Ls that has potential for application in drug delivery targeted to injured blood vessels.

Gene delivery system based on highly specific recognition of surface-vimentin with N-acetylglucosamine immobilized polyethylenimine.

Gene and drug-delivery systems that use immobilization of carbohydrates are useful for the specific targeting of lectin-expressing tissues. Here, we report that N-acetylglucosamine (GlcNAc) with polyethylenimine (GlcNAc-PEI) specifically interacted with vimentin-expressing cells such as 293FT and HeLa cells. Recently, the intermediate filaments vimentin and desmin have been reported to have GlcNAc-binding lectin-like properties on the cell surface. Therefore, GlcNAc-conjugated agents can be targeted to vimentin- and desmin-expressing cells and tissues. Vimentin-expressing 293FT and HeLa cells were efficiently transfected with green fluorescent protein and luciferase genes by using GlcNAc-PEI; the expression of these genes in vimentin-knockdown cells were low. Confocal microscopic analysis showed that GlcNAc-PEI complexes interacted with vimentin on the cell surface of HeLa cells. These results demonstrate that GlcNAc-PEI/DNA complexes were specifically taken up by 293FT and HeLa cells via vimentin. We suggest that this gene-delivery system could be used to target various vimentin-expressing cells such as fibroblasts and tumor cells.

Vimentin and desmin possess GlcNAc-binding lectin-like properties on cell surfaces.

Vimentin and desmin are intermediate filament proteins found in various mesenchymal and skeletal muscle cells, respectively. These proteins play an important role in the stabilization of the cytoplasmic architecture. Here, we found, using artificial biomimicking glycopolymers, that vimentin and desmin possess N-acetylglucosamine (GlcNAc)-binding lectin-like properties on the cell surfaces of various vimentin- and desmin-expressing cells such as cardiomyocytes and vascular smooth muscle cells. The rod II domain of these proteins was demonstrated to be localized to the cell surface and to directly bind to the artificial biomimicking GlcNAc-bearing polymer, by confocal laser microscopy and surface plasmon resonance analysis. These glycopolymers strongly interact with lectins and are useful tools for the analysis of lectin-carbohydrate interactions, since glycopolymers binding to lectins can induce the clustering of lectins due to multivalent glycoside ligand binding. Moreover, immunocytochemistry and pull-down assay with His-tagged vimentin-rod II domain protein showed that the vimentin-rod II domain interacts with O-GlcNAc proteins. These results suggest that O-GlcNAc proteins might be one candidate for physiological GlcNAc-bearing ligands with which vimentin and desmin interact. These findings demonstrate a novel function of vimentin and desmin that does not involve stabilization of the cytoplasmic architecture by which these proteins interact with physiological GlcNAc-bearing ligands such as O-GlcNAc proteins on the cell surface through their GlcNAc-binding lectin-like properties.

Regulation of cellular morphology using temperature-responsive hydrogel for integrin-mediated mechanical force stimulation.

A new culture substrate was developed for cells to be equibiaxially stretched using fibronectin (Fn)-immobilized temperature-responsive hydrogel. The cells cultured on the gel substrate were equibiaxially stretched with swelling of the gel, which was accompanied by slight changes of temperature. During gel swelling, changes of cell shape were clearly observed by optical microscopy because of high transparency of the gel. ERK was highly and transiently activated by mechanical stimulation whereas focal adhesion kinase (FAK) was not, indicating that mechanical signals were transduced into biochemical signals in cells. We found that cells formed filopodia-like structures in response to mechanical cues, suggesting that mechanical forces facilitated actin polymerization at the peripheral region. In the cytoplasm, paxillin-containing fibrous structures were formed along actin fibers. These results indicate that we can perform both analysis of intracellular signal transduction and observation of cell shapes at high magnification in our method.

Surface coating of bone marrow cells with N-acetylglucosamine for bone marrow implantation therapy.

Bone marrow implantation (BMI) has been performed clinically for the treatment of ischemic cardiovascular diseases. To achieve BMI effectively, accumulation of many bone marrow cells (BMCs) in an infarcted area of the myocardium is important. Previously, we reported that cardiomyocytes show strong interaction with N-acetylglucosamine (GlcNAc) and they can take up GlcNAc-conjugated liposomes. Thus, we examined whether GlcNAc-coated BMCs exhibit strong interaction with cardiomyocytes. The cell surface of BMCs was coated with GlcNAc without causing cell injury by GlcNAc-lipophilic polymers. It was found that the GlcNAc-coated BMCs exhibited strong interaction with cardiomyocytes. At 7 days of coculturing the GlcNAc-coated BMCs with cardiomyocytes, BMC-derived cardiomyocytes were generated. The number of BMC-derived cardiomyocytes was higher following coculture with GlcNAc-coated BMCs than following coculture with uncoated and maltose (MA)-coated BMCs. In this study, we demonstrated that the surface coating of BMCs with GlcNAc can be performed easily by using GlcNAc-lipophilic polymers and that GlcNAc-coated BMCs exhibited strong interaction with cardiomyocytes. Therefore, we think that cell surface coating with GlcNAc would help promote accumulation of BMCs in the infarcted area of the myocardium and that this accumulation would be helpful in the treatment of ischemic cardiovascular diseases with BMI.

Copolymers for hepatocyte-specific targeting carrying galactose and hydrophobic alkyl groups.

Core-forming hydrophobic alkyl groups were incorporated into amphiphilic PVLA to enhance the stability and inclusion ability of the homopolymeric micelles in water. The CAC and hepatocyte targeting in the synthesized P(VLA-co-VBH) were investigated in vitro. The CAC of the copolymers decreased and the stability of the copolymeric micelles increased with the incorporation of hydrophobic groups into the homopolymer. The galactose moieties in the copolymer could be recognized by the ASGP-R of the hepatocytes through a receptor-mediated mechanism. The copolymers efficiently delivered a water-insoluble drug to the hepatocytes. Hence, they be used to deliver hydrophobic drugs to cure various liver diseases.

Effective uptake of N-acetylglucosamine-conjugated liposomes by cardiomyocytes in vitro.

A drug delivery system (DDS) that targets the injured myocardium would serve as a novel therapeutic tool for cardiac diseases. To develop such a DDS, we investigated the interaction of 2 types of glycoside-conjugated liposomes containing a fluorescence substrate with cardiomyocytes. Flow cytometry revealed that cardiomyocytes adequately interact with N-acetylglucosamine-conjugated liposomes (GlcNAc-Ls). Furthermore, to confirm whether the agents encapsulated in GlcNAc-Ls affect the intracellular environment of cardiomyocytes, we prepared GlcNAc-Ls-containing pravastatin and examined the effect of pravastatin on cardiomyocytes. Pravastatin is a 3-hydroxy-3-methylglutaryl-CoA reductase inhibitor (statin) and is hydrophilic. It is reported that lipophilic statins enhance nitric oxide (NO) production and inducible nitric oxide synthase (iNOS) expression by interleukin-1beta (IL-1beta)-stimulated cardiomyocytes. The hydrophilic nature of pravastatin prevents its entry into cardiomyocytes; therefore, it cannot enhance both these processes. Treatment with GlcNAc-Ls-containing pravastatin specifically enhanced NO production and iNOS expression by IL-1beta-stimulated cardiomyocytes. Based on these results, we found that cardiomyocytes exhibit a high degree of interaction with GlcNAc-Ls, and GlcNAc-Ls-encapsulated agents can be effectively taken up by cardiomyocytes. We suggest that GlcNAc-Ls can be utilized therapeutically as a DDS for the injured myocardium.

Helical structure of sugar-carrying polystyrene in aqueous solution by circular dichroism.

Radical polymerization of N-p-vinylbenzyl-D-lactonamide (VLA) gave an optically active helical polymer. The stereoregularity of poly(N-p-vinylbenzyl-D-lactonamide) (PVLA) measured by 13C NMR spectroscopy showed a well-resolved sharp-line width, which was assigned to the phenyl C-1 carbon of the isotactic polystyrene (PS). The helical structure of PVLA shown by circular dichroism (CD) indicated that the aromatic groups were chirally supramolecular-packed giving optically active disaccharide units in the side chain covalently linked via an amide linkage with PS, the original PS not being optically active. The intensity of CD for PVLA (a) decreased with increasing temperature due to the change in the conformation of the phenyl group or to the breakdown of intermolecular hydrogen bonding of amide groups and (b) increased in a mixture of water and alcohol due to the increased hydrophobicity. The CD intensity for maltose-carrying PS (PVMA) was slightly higher than that of PVLA CD due to the more hydrophobic property of PVMA than PVLA.

Galactosylated alginate as a scaffold for hepatocytes entrapment.

Galactose moieties were covalently coupled with alginate through ethylenediamine as the spacer for enhancing the interaction of hepatocytes with alginate. Adhesion of hepatocytes onto the galactosylated alginate (GA)-coated polystyrene (PS) surface showed an 18-fold increase as compared with that of the alginate-coated surface and it increased with an increase in the concentration of GA. The morphologies of attached hepatocytes were observed to spread out at the 0.15 wt% GA-coated PS surface while round cells were observed at the 0.5 wt% GA-coated PS surface. Inhibition of hepatocytes attachment onto the galactose-carrying PS-coated surface occurred with the addition of the GA into the hepatocyte suspension, indicating the binding of GA with hepatocytes via the patch of asialoglycoprotein receptors. Primary hepatocytes were entrapped in the GA/Ca2+ capsules (GAC). Higher cell viability and more spheroid formation of hepatocytes were obtained in the GAC than in the alginate/Ca2+ capsules (AC). Moreover, liver functions of the hepatocytes such as albumin secretion and urea synthesis in the GAC were improved in comparison with those in the AC.